The dynamic probing rig LMSR-VK is a highly functional soil investigation machine, easy to transport due to the folding mast feature. It is versatilely suitable for working in confined spaces and is displaced in outdoor terrains by hand. It features a three-legged foot with crank legs for solid erection on site. The dynamic probing rig LMSR-VK can be used for soil-bearing capacity tests, compaction tests and for soil sampling.

UGB 1Vs is a hydraulically operated drilling machine on GAZ66 wheel chassis with excellent accessibility in heavy terrain. The hydraulic system is driven by a diesel engine mounted on the drilling rig platform. The drilling rig is suitable for drilling hydrogeological boreholes/wells, monitoring boreholes and geological exploratory wells with using core and rotary-percussion drilling techniques. Depending on the geological profile, the set drills up to a max. 30 m.

Light portable drilling machine Lumesa SIG Mounty 2000/92H is used for anchor hole drilling, root pile drilling or overburden drilling. It is able to carry out jobs, which were usually done with heavy crawler mounted drill rigs.

Type SIG Mounty 2000/92H is the heaviest within the SIG Mounty family, with feed force of 40 kN and casing 143 (178) mm.

Fraste MITO-40 is a hydraulically operated crawler drilling machine. The hydraulic system is driven by a diesel engine mounted on the drilling rig platform. The variable drill rig kinematic kits are suitable for drilling hydrogeological boreholes, monitoring boreholes and geological exploratory boreholes using drilling by down-the-hole hammer and rotary boring techniques using direct drilling fluid. It is also possible to drill core boreholes (including wire-lines), boreholes in building geology, especially boreholes for root piles, anchors and nails, and boreholes for primary circuits of heat pumps.

Mobile sampling DPT rig Geoprobe 5400 is sampling device on 2-axle undercarriage Mercedes 711 with rear axle shutter and conditioned laboratory space. The rig is placed in goods space of the car, it is equipped with gun carriage with hydraulic hammer GH40. Hydraulic engines are driven by compression ignition engine Mercedes-Benz.

Geoprobe 5400 is sampling drilling set dedicated for sampling of soils, underground waters and air into the depth cca. 25 m. Drilling implements consist of rods (31,8 mm), sampler for ground water, soil air and auxiliary implements.

Self-propelling sampling and drilling rig Geoprobe 66DT is mounted on caterpillar undercarriage. It is ideal solution for drilling inside the industrial plants (even through concrete) or on other places with limited access. For longer distances it is transported on 2-axle trailer barrow with inroading ramp, which is pulled by the cross-country automobiles Nissan or Mitsubishi. Rig is equipped with gun carriage and hydraulic hammer GH66, the strongest of Geoprobe hammers. Hydraulic engines are driven by compression ignition engine Kubota.

Geoprobe 66DT is sampling and drilling rig dedicated for sampling of soils, underground water and air into the depth cca. 30 m. Drilling implements consist of rods (31,8 mm), soil samplers, samplers for water and soil air and auxiliary implements. This Geoprobe equipment with rotary drilling head enables us to use core drilling and rotary-percussion drilling technology with core barrels of diameter 73 -156 mm and hollow spirals of diameter 156 mm. By this technologies depth of 10 -15 m can be reached.

SCHRAMM T660 Rotadrill is a hydraulically operated drilling machine mounted on a truck chassis with a compressor that provides a large amount of high-pressure air. Platform mounted diesel engine provides reliable drive for all hydraulic and pneumatic systems. The robust drive of the top engine rotation and the efficient handling of the drill pipes in carousel charger mean high productivity in the workplace and more time dedicated to drilling itself.

It is suitable for drilling in hard rock, namely hydro-boreholes, monitoring boreholes and geological exploratory boreholes, using drilling and rotary drilling by down-the-hole hammer techniques using direct drilling fluid.

Mobile drilling rig UKB-500 S provides drilling of vertical holes into the maximal depth of 300 m with final drilling diameter of 59 mm.

It is equipped with core irrigation drilling technology by water or dry drilling with spirals. The drilling rig is mounted on the chassis of the URAL 375 off-road truck with excellent throughput in heavy terrain. It is also equipped with a jack-knife drilling mast and a hydraulically driven SKB-4 drilling machine.

Massenza M-I-25 is a hydraulically operated drilling machine with a high-performance mud pump on the Iveco truck chassis.

The hydraulic system is driven by a diesel engine mounted on the drilling rig platform. The rig is suitable for drilling hydrogeological boreholes, monitoring boreholes and geological exploratory boreholes using drilling by down-the-hole hammer and rotary boring techniques using direct drilling fluid as well as wells for primary heat pump circuits. The range of the drilling rig is up to 500 m.